Umenzi weNdibano ye-PCB ekhokelayo: i-turnkey epheleleyo kunye neenkonzo ze-turnkey kitted
I-PCB ShinTech yenye yeenkampani ezaziwayo-kakuhle ze-PCB zeNdibano e-China, enamava eminyaka eyi-15+ yokubonelela nokuhlanganisa iibhodi zesekethe.Indawo yethu yodidi oluphezulu isebenzisa izixhobo zamva nje ze-SMT kunye ne- Through-hole ukwenza iimveliso ezisemgangathweni nezithembekileyo ngexesha elifanelekileyo kubathengi bethu.
iinkonzo
I-TURNKEY NGOKUPHELELEYO KUNYE NEENKONZO EZIPHELELEYO
Inkonzo yendibano yePCB yeturnkey ngokupheleleyo
Ngendibano epheleleyo ye-turnkey, sijongana nayo yonke imiba yeprojekthi yendibano: ukwenza iibhodi zesekethe ezingenanto, izixhobo zokukhangela kunye namacandelo, i-welding, indibano, ukulungelelaniswa kwezixhobo kunye nefektri yendibano ngamaxesha okukhokela, ukugqithisa okunokwenzeka / ukutshintshwa, njl., ukuhlolwa kunye novavanyo, kunye ukuhanjiswa kweemveliso kubathengi.
Ikhithi yokujika yekhithi/inkonzo yendibano yePCB
I-turnkey / kitted turnkey ivumela abathengi ukuba bathathe ulawulo lwenkqubo enye okanye ezininzi ezidweliswe ngasentla.Amaxesha amaninzi kwiinkonzo ze-turnkey, umthengi usithumelela amacandelo (okanye inxenye yomthwalo ukuba ayibonelelwanga onke amacandelo) kwaye siyayihoya enye.
Kwabo bazi kakuhle into abayifunayo kwi-PCBs zabo, kodwa mhlawumbi abanalo ixesha okanye izixhobo zokuhlanganisana, indibano yebhodi yesiphaluka eprintiweyo yinto egqibeleleyo.Ungathenga inxalenye okanye onke amacandelo kunye neenxalenye ozifunayo, kwaye siya kukunceda ukuba uhlanganise ii-PCBs.Oku kunokukunceda ukuba ube nolawulo olungcono lweendleko zemveliso kwaye wazi ukuba ulindele ntoni ngeebhodi zeesekethe ezigqityiweyo.
Nokuba yeyiphi na inkonzo oyikhethayo, siqinisekisa ukuba ii-PCB ezingenanto zenziwe ngokweenkcukacha, zidityaniswe ngokufanelekileyo kwaye zivavanywe ngobunono.Ngeenkqubo ezizenzekelayo kakhulu, siyakwazi ukufumana iprojekthi yakho igqitywe ngokufanelekileyo ukusuka kwiiprototypes ukuya kwimveliso yevolumu enkulu.
IXESHA LOKUKHOKHELA
Ixesha lethu lokukhokela kwi-turkey yee-odolo zendibano ye-PCB ihlala ijikeleze iiveki ezi-2-4, ukwenziwa kwe-PCB, ukukhangela icandelo, kunye nendibano iya kugqitywa ngexesha lokukhokela.Kwinkonzo ye-PCBA ekhithiweyo, iintsuku ezi-3-7 zinokulindelwa ukuba iibhodi ezingenanto, amacandelo kunye nezinye iindawo zilungile, kwaye zinokuba zifutshane njengeentsuku ezi-1-3 zeprototypes okanye ukujika ngokukhawuleza.
1-3 iintsuku zokusebenza
● 10 iipcs Ubuninzi
3-7 iintsuku zokusebenza
● 500 iipcs Ubuninzi
7-28 iintsuku zokusebenza
● Ngaphezulu kwe-500 pcs
Ukuhanjiswa okucwangcisiweyo kwakhona kuFumaneka kwiMveliso yoMqulu oPhezulu
Ixesha elikhethekileyo lokukhokela lixhomekeke kwiinkcukacha zemveliso yakho, ubungakanani kunye nokuba lixesha lokuthenga okuphezulu.Nceda uqhagamshelane nommeli wakho weentengiso ngeenkcukacha.
Caphula
Nceda udibanise ezi fayile zilandelayo zibe yifayile yeZIP enye kwaye uqhagamshelane nathi aphasales@pcbshintech.comyocaphulo:
1. IFayile yoYilo lwePCB.Nceda uquke zonke iiGerbers (ubuncinane sifuna umaleko wobhedu), iileya zokuncamathisela ze-solder, kunye neeleya zesikrini sesilika).
2. Khetha kunye nendawo (Centroid).Ulwazi kufuneka lubandakanye indawo yecandelo, ukujikeleza, kunye nabaqulunqi bereferensi.
3. IBhili yeeMathiriyeli (BOM).Ingcaciso enikiweyo mayibe ngefomathi efundeka ngomatshini (kukhethwa i-Excelleon).I-BOM yakho ekhutshiweyo kufuneka ibandakanye:
● Ubungakanani benxalenye nganye.
● Umyili wereferensi - ikhowudi yealphanumeric echaza indawo yecandelo.
● Umthengisi kunye/okanye inombolo yeCandelo leMFG (Digi-Key, Mouser, Etc.)
● Inkcazelo ngenxalenye
● Inkcazo yephakheji (QFN32, SOIC, 0805, njl. njl. iphakheji inceda kakhulu kodwa ayifuni).
● Uhlobo (SMT, Thru-Hole, Fine-pitch, BGA, njl.).
● Ukudibanisa inxalenye, nceda uqaphele kwi-BOM, "Musa ukuFakela" okanye "Musa ukulayisha" kumacandelo angayi kufakwa.
Khuphela iimfuno zethu zefayile:
Ubunakho beNdibano
Ubunakho bendibano ye-PCB ye-PCB ShinTech ibandakanya i-Surface Mount Technology (SMT), i-Thru-hole, kunye ne-teknoloji exubeneyo (i-SMT ene-Thru-hole) yokubeka enye kunye namacala amabini.I-Passive Components incinci njenge-01005 iphakheji, i-Ball Grid Arrays (BGA) incinci njenge-.35mm pitch kunye nokubekwa kwe-X-Ray ehlolwe, kunye nokunye:
Ubunakho beNdibano ye-SMT
● Ukudlula Phantsi ukuya ku-01005 ubukhulu
● Uluhlu lweGridi yeBhola (BGA)
● I-Ultra-Fine Ball Grid Array (uBGA)
● I-Quad Flat Pack No-Lead (QFN)
● Ipakethe yeFlat yeQuad (QFP)
● I-Plastiki Leaded Chip Carrier (PLCC)
● SOIC
● Ukupakisha-Oku-Package (PoP)
● Iipakethi zeChip ezincinci (I-Pitch ye-0.2 mm)
KwiNdibano ye-Hole
● I-Automated and Manual through-Hole Assembly
● Indibano yeteknoloji ye-Thru-hole isetyenziselwa ukudala uqhagamshelo olomeleleyo xa kuthelekiswa nobuchwepheshe bokunyuka komphezulu ngenxa yeenkokeli ezihamba yonke indlela kwibhodi yesekethe.Olu hlobo lwendibano luhlala lukhethwa kuvavanyo kunye neprototyping efuna ukuguqulwa kwecandelo lezandla kunye nezicelo ezifuna ukuthembeka okuphezulu.
● Iindlela zokuxhoma ngomngxuma ngoku zidla ngokugcinelwa amacandelo amaninzi okanye anzima ngakumbi anjenge-electrolytic capacitors okanye ii-electromechanical relays ezifuna amandla amakhulu ekuxhaseni.
Ubunakho beNdibano ye-BGA
● Ukubekwa kwe-State-of-art ngokuzenzekelayo kwe-Ceramic BGA, i-Plastiki BGA, i-MBGA
● Ukuqinisekiswa kwe-BGA's kusetyenziswa inkqubo yokuhlola i-HD X-reyi yexesha lokwenene ukuphelisa iziphene zendibano kunye neengxaki zokubethelela, ezifana ne-solder ekhululekileyo, i-cold soldering, iibhola ze-solder kunye nokuncamathisela ibhuloho.
● Ukususa kunye nokutshintsha i-BGA's & MBGA's, ubuncinane be-0.35mm pitch, ii-BGA ezinkulu (ukuya kwi-45mm), i-BGA yokuHlaziya kunye nokuBhalisa kwakhona.
I-Mixed Assembly Advantages
● Mixed Assembly - Through-Hole, SMT kunye amacandelo BGA afakwe kwi-PCB.Itekhnoloji exutywe macala omabini, i-SMT (iNtaba yoMphezulu) kunye nomngxuma wokuhlanganisa iPCB.I-BGA eyodwa okanye emacala amabini kunye nofakelo lwe-micro-BGA kunye nokusebenza kwakhona nge-100% yokuhlolwa kwe-X-ray.
● Ukhetho lwamacandelo angenalo ulungelelwaniso lokunyuka komphezulu.
Akukho ntlama yesolder isetyenzisiweyo.Inkqubo yendibano yesiko ukuze ihambelane neemfuno ezithile zabathengi bethu.
Ulawulo lwemeko
Sisebenzisa iinkqubo zokulawula umgangatho ngokucokisekileyo.
● Zonke ii-PCB ezingenanto ziya kuvavanywa ngombane njengenkqubo eqhelekileyo.
● Amalungu abonakalayo aya kuhlolwa ngeliso okanye nge-AOI (ukuhlolwa okuzenzekelayo kokubona).
● Iindibano zokuqala zitshekishwa ngaphandle kwe-intanethi ngabahloli bomgangatho abanamava.
● Xa kuyimfuneko, ukuhlolwa kwe-X-reyi yangaphakathi kwe-BGA (i-Ball Grid Array) yokubekwa yinkqubo eqhelekileyo.
IZibonelelo zeNdibano zePCB kunye neZixhobo
I-PCB ShinTech inemigca ye-SMT eli-15, imigca emi-3 ephumela emngxunyeni, imigca emi-3 yokugqibela yendibano endlwini.Ukufezekisa ukusebenza okuncomekayo okuphuma kwindibano yePCB, siqhuba utyalo-mali kwizixhobo zamva nje, sihlaziya ubuchule phakathi kwabaqhubi abaqinisekisa ngesandi esihle see-BGA's kunye neepakeji ze-01005 kunye nazo zonke iindawo ezixhaphakileyo ezibekwayo.Ngamaxesha anqabileyo sifumana ubunzima ngokubekwa kwamalungu, iPCB ShinTech ixhotyiswe ngaphakathi ukuze iphinde isebenze kwakhona ngobuchwephesha lonke uhlobo lwecandelo.
Uluhlu lweZixhobo zeNdibano zePCB
| Umenzi | Umzekelo | Inkqubo |
| Comiton | MTT-5B-S5 | Umhambisi |
| GKG | G5 | Iprinta yeSolderpaste |
| YAMAHA | YS24 | Khetha kwaye ubeke |
| YAMAHA | YS100 | Khetha kwaye ubeke |
| I-ANTOM | I-SOLSYS-8310IRTP | Hlaziya i-Oven |
| JT | NS-800 | Hlaziya i-Oven |
| OMRON | I-VT-RNS-ptH-M | AOI |
| Qijia | QJCD-5T | I-oveni |
| Suneast | SST-350 | Wave Solder |
| I-ERSA | I-VERSFLOW-335 | ISolder ekhethiweyo |
| Glenbrook Technologies, Inc. | CMX002 | I-X-Ray |
I-PCB kunye neNkqubo yeNdibano ye-Electronic
Kangangoko sinakho, siya kusebenzisa iinkqubo ezizenzekelayo ukubeka izinto kwi-PCB yakho engenanto, sisebenzisa ukukhetha kwakho kunye nokubeka idatha yeCAD.Ukubekwa kwecandelo, ukuqhelaniswa kunye nomgangatho we-solder ngokuqhelekileyo uya kuqinisekiswa kusetyenziswa uHlolo oluzenzekelayo lwe-Optical.
Iibhetshi ezincinci kakhulu zinokubekwa ngesandla kwaye zihlolwe ngamehlo.Yonke i-soldering iya kuba kwimigangatho ye-Class 1.Ukuba ufuna iKlasi yesi-2 okanye iKlasi yesi-3, nceda usicele ukuba sicaphule.
Khumbula ukuvumela ixesha ukongeza kwixesha lakho elicatshulweyo lendibano ukuze sikwazi ukwenza i-BOM yakho.Siya kucebisa ukwanda kwexesha lokuhambisa kwi-quote yethu.
Thumela umbuzo wakho okanye isicelo sekowuti kuthi aphasales@pcbshintech.comukuqhagamshelwa komnye wabameli bethu bezentengiso abanamava kwishishini ukukunceda ufumane umbono wakho wokuthengisa.
